|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8
|
|
Sector
|
Water Storage and Supply Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Jammu-kashmir Tenders
|
Ref.No
|
50464762
|
|
Closing Date
|
12 - Jul - 2022
|
6 Days to go
|
View Tender Details
|
|
Annual maintenance contract and supply of vital components - providing & filling of engine oil of 20w40 grade., make:-servo/castrol/shell", "providing & fixing m. oil filter , part no:-3166554 fleetgaurd , providing & fixing gear box filter, part no:-3166554 fleetgaurd ", "providing & fixing fuel filter , part no:- 3873576 fleet guard/4084133 or equivalent.", providing & fixing air filter inner/ outer, part no:- af1848 fleet guard/af 4055280 fleet guard, providing & fixing auxiliary m.oil filter, part no:- lf16029 fleet guard", "providing & filling of hydraulic oil 68 grade. the job also includes draining of hydraulic oil from the machine and filling of the fresh hydraulic oil., make:-servo/castrol/shell", "supply of castrol multipurpose grease., make:-castrol/valvoline", engine side repairs:, complete overhauling of kta 1150p 470 hp cummins diesel engine of the crawl cat dredger which includes replacement of worn out parts. the job also includes complete overhauling of fuel pump and testing of the same for 200hrs of working under different load conditions., complete overhauling of cummins make fuel pump of kta 1150p cummins diesel engine of the crawl cat dredger which includes replacement of worn out parts and fitting of repaired fuel pump and injectors to the machine as site and testing on different load conditions., calibration of cummins make fuel pump of kta 1150p cummins diesel engine of the crawl cat dredger which includes replacement of worn out parts and fitting of repaired fuel pump and injectors to the machine as site and testing on different load conditions., replacement of 01 no. injector of kta 1150p diesel engine of crawl cat dredger head including replacement of parts., providing and fitting of rear oil seal set to the mg 154 kirloskar pneumatic gear box of the dredger after dislocation of gear box and bearing housing. the job includes providing and fitting of oil seal to the bearing housing. the job also includes refilling of fresh oil to the gear box and bearing housing. oil shall be provided by the authority., repairs to marine gear box, kirloskar make model:-mg514/2.3:1,spec no:-504.800 ,s.no:-aa0011, by way of dismantling of the gear box. the job includes replacement of damaged clutch plates, damaged gears, and other minor repairs required to complete the whole job. the job also includes servicing/cleaning of entire gearbox using hsd and dhoti cloth which is to be arranged by the firm. after finishing the repairs the gearbox is tested for the full load on full load conditions., "supply,installation,testing and commissioning of lube oil gear box pump complete as of kirloskar make., part no:-5030220050 ", gantry:, providing and fixing of manually operating push pull & geared monorail trolley of 05 ton capacity of indef or any other equivalent make along with necessary nuts bolts ,clamps etc., providing and fixing of 05 ton capacity chain pulley of indef make or any other equivalent make along with necessary nuts bolts ,clamps etc., hoses:, providing and fitting of sae 100 r2 steel wire reinforced hydraulic hose of flange type to the crawl cat dredger .the hydraulic hose should have following specifications. the job includes providing and fitting of hydraulic "o" ring with id 25mm and od 31mm.the job further includes providing and fitting of 04 no high tensile half threaded bolts having length 75mm and dia 12mm., id: 12.5mm, length :1.0 m , wp 350 bars, flanges as per sample. , id: 12.5mm, length :1.5m , wp 350 bars, flanges as per sample. , id: 12.5mm, length :2.0 m , wp 350 bars, flanges as per sample. , id: 12.5mm, length :3.0 mm , wp 350 bars, flanges as per sample. , id: 12.5mm, length :4.0 mm , wp 350 bars, flanges as per sample. , id: 12.5mm, length :5.0 mm , wp 350 bars, flanges as per sample. , providing and fitting of sae 100 r2 steel wire reinforced hydraulic hose of adaptor type to the crawl cat dredger. the hydraulic hose should have following specifications., id: 12.5mm, length :0.5 m , wp 250 bars, adapters as per sample. , id: 12.5mm, length : 2.0 m , wp 250 bars, adapters as per sample. , id: 12.5mm, length : 3.0 m , wp 250 bars, adapters as per sample. , id: 12.5mm, length : 4.0 m , wp 250 bars, adapters as per sample. , id: 12.5mm, length : 5.0 m , wp 250 bars, adapters as per sample. , providing and fitting of seamless hydraulic pipes of high grade steel material for following dia. for the crawling legs/engine room/ladder hoist assembly of cat crawl dredger capable of withstanding pressures upto 350 bars. the job is inclusive of providing and fitting of fittings of bends, nipples etc. of stainless steel material to make the job complete. the job also includes painting a coat of red oxide paint to the hoses for protection from corrosion., 12.5 mm, 20 mm, providing and fitting of g.i "b" class piping with bends, fittings for covering drowned portion of seamless pipes., 1/2" dia., 3/4" dia., chasis side:, "providing and fitting of seal k
|
|
|
|
|
|
|